|Material Of Inner Chamber:||Silicon Carbide Ceramics||Power:||37kW|
|Color:||Blue And White||Electric:||ABB Or Delixi|
|Feed Pump:||1ARO Diagramgh Pump||Grinding Media:||1.0-1.4mm Beads|
30kW SiC pin grinding machine,
5um pin grinding machine,
5um oil production machine
Enegy Saving 30kW SiC Grinding Machine 5um Oil Production Machine
This AP series is higher 20% productivity than SP series, widely used in water base Paint Coating inks, high value productions, with the Sic Inner chamber, low temperature and more wearable and keep white color for products.
The main parameter:
|1||Main motor power(kW)||37||3phase,380V 50Hz|
|4||Water presure Mpa||0.3|
Cooling water consumption
The lower limit can be
selected for the water consumption, in case that the cooling water temperature is lower than 10℃.
|6||Overall dimension (mm)||2000*820*1900|
The Configuration instructions
|NO.||Main parts||AP 50 Wet Bead grinder||Notes|
|1||Outer chamber||304 stainless steel|
|2||Inter chamber||silicon carbide ceramics|
|3||Dispersing shaft||40Cr with hard chromium plating|
|4||Dispersing disk||304 Stainless steel|
|5||Mechanical seal||Double Mechanical seal with Pressure of 0.45 Mpa|
|5||Feeding and discharging end covers on the cylinder||304 stainless steel|
|6||Turbine centrifugal separator and pegs||304 stainless steel and YG6 pges|
|7||Static discharge screen ring||304 stainless steel screen ring with 304.Gaps: 0.5mm.|
Intelligent double mechanical
seal with mandatory
|9||Feeding pump||without pump,with appliance parts|
|10||Oil box||Non-Vision the inner box|
|11||Appliance configuration||Non Explosion-proof machine, suitable for water base materials, explosion-proof motor 30kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with Non EX-proof electrical contacts.|
|12||Fasteners and connecting parts||
Stainless steel clamp-type
|Quick and convenient|
1.We will recommend the suitable bead mills according to your information and demand, such as industry, fineness, temperature, viscosity, production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be selected according to your different grinding materials and industries.
3. The control system will be matching of different demand, such as PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.