| Place of Origin: | China |
|---|---|
| Brand Name: | AllWin |
| Certification: | ISO9001 |
| Model Number: | SP20 SP30 SP50 |
| Minimum Order Quantity: | 1-5set |
| Price: | USD5000--USD31800/set |
| Packaging Details: | Wooden boxes |
| Delivery Time: | 20-30 Working Days |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 30sets /month |
| Inner Chamber: | 304 Stainless Steel | Applicaiton: | Paint Oil Ink Paper Making |
|---|---|---|---|
| Explosion: | Non Explosion Proof | Power: | 18.5-37 Kw |
| Voltage: | 220V | Weight: | 1T-1.5T |
| Volume: | 20L 30L 50L | Color: | White |
| Grinding Type: | Dispersing Disc | Mechanical Seal: | Double Mechanical Seal With Independent Technology |
| Cooling Water Temperature: | Less 10°C | Feed Pump: | 1" Diaphragm Pump |
| High Light: | Water Base 50L wet bead milling,304ss wet bead milling,304ss pin grinding machine |
||
20 30 50L Water Base Paint Oil Ink Paper Making Sand Mill Machine For 1"ARO Feed Pump
The main introduction of sand mill machine:
1. High independent technology: This Sand grinding mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with independent technology could resistant to more than 1600 kinds of solvents.
2. Urtra fineness: The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .
3. Better Cooling system:The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange.
4. High Efficiency: The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.
The main techinical data of sand mill machine:
| No | Main parameters | SP30 | Note |
| 1 | Non Explosion-proof motor kW | 22 kW (Non Ex) | |
| 2 |
Effective volume of grinding chamber (L) |
30 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 1850*900*1900 | |
| 6 | Weight (T) | 1T |
The main Configuration instructions of sand mill machine:
| No | Main parts materials | SP 30 Non Explosion-proof | Notes |
| 1 | External cylinder | 304 stainless steel | |
| 2 | Internal cylinder | 304 stainless steel o | |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | 304 stainless steel | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | Turbine centrifugal separator and pins | 304 stainless steel and YG6 pegs | |
| 7 | Static discharge screen ring | Wire Wound screen ring with 304.Gaps: 0.5mm. | |
| 8 | Mechanical seal |
Intelligent double mechanical seal with mandatory lubricating-cooling system |
|
| 9 | Feeding pump | 1” ARO diaphragm pump; | |
|
10 |
Appliance configuration | Non Explosion-proof machine, suitable for water base materials, motor 55kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts., Control system (button type) | |
| 11 | Fasteners and connecting parts |
Stainless steel clamp-type connecting parts |
Quick and convenient |
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need arrange maintenance engineer for you.
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Also offered the related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
The Customer workshop:
Note:
1.We will recommend the suitable bead mills according to your information and demand, such as industry, fineness, temperature, viscosity,production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be chosed according to your different grinding materials and industries.
3. The control system will be matching of different demand, such as PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
