|Place of Origin:||China|
|Model Number:||SP20 SP30|
|Minimum Order Quantity:||1set|
|Packaging Details:||Wooden boxes|
|Delivery Time:||20-30 Working Days|
|Payment Terms:||T/T, MoneyGram, Western Union|
|Supply Ability:||30sets /month|
|Power:||18.5 22kW 30kW||Voltage:||380 220V|
|Litre:||20L 30L||Inner Chamber Material:||Wearable Alloy Steel|
|Grinding Beads:||1.2-1.4mm Zirconia Beads||Package:||Wooden Boxes Or Film Package And Nacked|
22kW bead grinding machine,
30 litre Wearable bead grinding machine,
30 litre Wearable wet grinding mill
22kW 30litre High Capacity Low Temperature Wearable Alloy steel For Oil Base Sand Mill Machine
This Sand mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with independent technology could resistant to more than 1600 kinds of solvents. The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange. The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency. .
The main introduction of Sand Mill Machine
1. The structure is compact and stable: the motor is placed on the upper part, the grinding chamber is placed on the lower part, and the total height of the equipment is low. More than 20L large model mills with chamber slide rail for easy maintenance.
2. Double mechanical seal: It has 2 patented technologies, with forced coolant, sealing ring resistant to 1600 kinds of solvents, coolant is compatible with materials, no pollutants, and reliable operation.
3. Discharge separation system: Large flow, no blocked: dynamic hollow rotor-super large area slot separator uses dynamic centrifugal force separation principle. Use of extremely small grinding beads (0.3 to 3 mm).No export blockage occurs under high flow conditions. Good heat dissipation, narrowest particle size distribution.
4. Classic disc dispersing: 3 side discs, 4 side discs, curved discs, lumbar discs and eccentric discs, different materials can be selected, such as stainless steel, alloy steel, ceramic, hard alloy &PU etc.
5. Grinding inner chamber: It has two patented technologies: chamber cooling and disassembly. The chamber volume is from 0.6-300L. The materials are stainless steel, alloy steel, ceramic, hard alloy & PU, etc.
6. Electrical display and control: basic column of operation column, more integrated higher control system and PLC Allwin data acquisition hardware and software system, and more process control and process optimization system.
The Technical Data of Sand mill
|1||Non Explosion-proof motor kW||18.5/22kW (Non Ex)|
Effective volume of
grinding chamber (L)
|3||Water pressure (MPa)||0.3|
|4||Cooling water consumption (L/min)||2.5 -3m3/h||Advise offer the Cooling water less 10°C|
The Configuration instructions of Sand mill
|No||Main parts||SP 20 Non Explosion-proof||Notes|
|1||Outter chamber||304 stainless steel|
|2||Inner chamber||Silicon Carbide Ceramics|
|3||Dispersing shaft||40Cr with hard chromium plating|
|4||Dispersing disk||wear resistant steel|
|5||Feeding and discharging end covers on the cylinder||304 stainless steel|
|6||Turbine centrifugal separator and pegs||304 stainless steel and YG6 pegs|
|eg||Static discharge screen ring||Wire Wound screen ring with 304.Gaps: 0.5mm.|
Intelligent double mechanical
seal with mandatory
|9||Feeding pump||1.” ARO diaphragm pump;|
|Appliance configuration||Non Explosion-proof machine, suitable for water base materials, motor 55kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts., Control system (button type)|
|11||Fasteners and connecting parts||
Stainless steel clamp-type
|Quick and convenient|
The Application filed: Paint and Coating,Pigment and dyestuffs,Printing inks/ Digital inkjet ink,Gravure inks,Medicine and Cosmetics,Pesticide and Agrochemical industry,Food and food processing,Non-metallic minerals,HI-Tech nanometer products,Paper and Paper making chemical.
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need arrange maintenance engineer for you.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.